- The Two-W Bison Equipment is composed of a series of panels and
gates set up to form a series of small containment sections or pens
that will hold one bison comfortably. The "zero
visibility" principle has been applied so the bison can not see
out of the system. Each section can be made of panels and/or gates
either 8, 10 or 12 feet long or combinations to form a "C"
or "S" configuration, or with the same length panels and
gates on each side it will form a straight system. The block door
sections that the panels and gates connect to are 6 feet 6 inches
long with a 5 foot block door in them. The panels and gates are all
7 feet high and sheeted solid with a 4 inch high viewing slot the
full length.
- The sections are large enough to allow the bison to turn around
quite easily. This lets them settle down much faster than the old
"crowding" methods.
- The panels and gates can be set up to suit your specific needs as
the gates and panels come in the same lengths and are
interchangeable. You can design your system to maximize your
efficiency.
- The last section behind the squeeze chute should have a gate in it
and can then be also used like a palpation cage.
- Some of the users of this system use it for cattle as well as
bison.
- The bison equipment is constructed of primarily 2 inch 13 gauge
tube and is very rugged.
- When used in conjunction with the Pearson Bison Squeeze Chute and
our 600 Series equipment we
feel this to be the best system and method of handling bison on the
market today.
- All the Bison equipment is coated with our unique
gray powder paint system and then baked for a long
lasting finish that stands up to the most severe climate
and weather conditions.
|
