- 500 Series Corral Gates are constructed of 2"
outside diameter 13 gauge high tensile steel.
- Available sizes are 4, 6, 8, 10, 12, 14 and 16 foot
lengths.
(Measurements are opening size).
- All 500 Series Corral Gates have six horizontal rails and
the 10 and 12 foot have 1 row of vertical spokes.
The 14
and 16 foot panels have 2 rows of vertical spokes.
The 4, 6 and 8 foot panels have no vertical spokes.
- 500 Series Corral Gates are 6 feet high when mounted the recommended 1 foot high.
- This gate line is designed to hang on a wooden post or
wall. All the gates come with two 13 Inch bolts mounted
on the hinges. All you have to do mount the gates is to
drill two 1 inch holes. One of the hinges will slide to
allow for some inaccuracy in drilling the holes.
- All the gates also come with 30 inches of chain with one
end welded to the gate. There is also a chain latch to
receive the chain for securing the gate closed. The latch
has a skewed slot to minimize the livestock or horses
from rubbing the latch open.
- Primary use is corrals and penning for high pressure
areas for large cattle, buffalo and horses.
- All panels are all coated with our unique gray powder
paint system and then baked for a long lasting finish
that stands up to the most severe climate and weather
conditions.
- This series of gates have been used for many
applications, from cattle and buffalo, to horses as well,
with many gates used in Ranching, Feedlot, Rodeo, and
Auction Market applications. There are many gates in use
from Alaska all over the northern and central United
States, most of Canada and some in Europe.
|
