- 400 Series High Pole are constructed of all 2"
outside diameter 13 gauge high tensile steel.
- Available sizes are 8, 10 and 12 foot lengths.
(Measurements are to post centers).
- All 400 Series High Pole Gates have five horizontal rails
and they have 1 row of vertical spokes.
- 400 Series High Pole Gates are 5 feet high when mounted
on the 400 Series Posts.
- The overall clearance is 6 feet 10 inches for the
standard High Pole and 8 feet 8 inches for horseback.
- High Pole Gates come with a plunger latch installed with
an option of a horse back latch.
- Primary use is for gates in corrals and penning with
medium pressure from cattle.
- One of the more common uses is in timed event penning in
Rodeo Systems.
- All High Pole Gates are all coated with our unique gray
powder paint system and then baked for a long lasting
finish that stands up to the most severe climate and
weather conditions.
- Also available is a 408 HPG with a split gate for
calving. See "GATES" and "ANIMAL HEALTH
CENTER" for more information.
|
